Bleed Ring Manufacturers in India

Bleed Ring Class 150, Drip Ring, Bleed Ring Suppliers

RTJ Bleed Ring, 2 Bleed ring, ASME B16.20 Bleed Ring Raised Face, Bleed Ring Sizes, ASME B31.3 Bleed Ring Flange

4 Bleed Ring Weight, Pipe Bleed Ring, Bleed Ring Distributors, Bleed Ring RF FLG 150 LB, Bleed Ring Price List, Bleed Ring ASME Standrad

RTJ Bleed Ring

RTJ Bleed Ring

Bleed Ring Manufacturer

Bleed Ring Manufacturer


Marcel Piping is well known Bleed Ring Manufacturers in India with high quality raw material, face of the bleed ring can be manufactured to match with any flange type.Bleed ring is a ring section with one or more radial pipe connections manufacturerd to fit between standard flanges within the bolt circle, using conventional gasket material. The ring normally comes in sizes 3/4″ tapped or 1/2″ socket weld for connecting with instruments and valves . RTJ bleed ring has different sizes based on the ANSI flange rating of the process piping.There is no more difference between Drip Rings and Bleed rings.

The standard sizes NPS 1 to NPS 24 and ASME Pressure Classes 150 through 1500. 2 Bleed Ring can be used instead of an orifice flange union. It is easily installed as compare to orifice flanges, especially in a brown field application.Flat Face bleed Ring provide a convenient way of draining piping, taking samples, attaching instruments or even bleeding of a valve. When used with a valve and blind flange, it allows you to relieve the pressure if your valve is leaking before you remove the flange, check Bleed Ring Dimensions, sizes and weight as per requirement.

Bleed Ring Manufacturers in India
Supplier Of Bleed Ring Flat Face,Bleed Ring RF, Bleed Ring Cost, RTJ Bleed Ring Weight, Blind Ring Singapore, Blind Ring Suppliers UK
Blind Ring Suppliers in Singapore, ASME B16.20 Bleed Ring, Bleed Ring Malaysia, Bleed Ring Material, Bleed Ring Manufacturers, ASME B31.3 Bleed Rings, Drip Rings

ANSI/ASME B16.5 Bleed Ring Standard Specification

Dimensions  ASME B16.5 – ASME B16.20 – ASME 31.3
Size 1/2″ – 24″ AND 1 13/16” – 4 1/16”
Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc.
Flange Face Type Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)

 

ASME B16.5 Bleed Ring Material Specification

Stainless Steel Bleed Ring : 
ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L

Duplex & Super Duplex Steel Bleed Ring : 
ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61

Carbon Steel Bleed Ring : 
ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706

Low Temperature Carbon Steel Bleed Ring : ASTM A350, LF2, LF3

Alloy Steel Bleed Ring : 
ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91

Copper Alloy Steel Bleed Ring : ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200

Nickel Alloy Bleed Ring : 
ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020)

 

ANSI BLEED RING DIMENSIONS, BLEED RING SIZES

Bleed Ring Dimensions

Class 150 Bleed Ring Dimensions, 4 Bleed Ring Weight

Pipe Size

(NPS)

ASME-ANSI Class Dimension

A (Outside Diameter – IN)

B (Inside BORE-IN)
150 300 600 900 1500 2500
1/2
3/4
1 2 1/2 2 3/4 2 3/4 3 3 3 1/4 1 1/8
1 1/4 3 2 7/8 3 1/8 3 1/8 3 3/8 1 1/2
1 1/2 3 1/4 3 5/8 3 5/8 3 3/4 3 3/4 4 1/2 1 5/8
2 4 4 1/4 4 1/4 5 1/2 5 1/2 5 5/8 2 1/8
2 1/2 4 3/4 5 5 6 3/8 6 1/2 2 1/2
3 5 1/4 5 3/4 5 3/4 6 1/2 6 3/4 7 5/8 3 1/8
3 1/2 6 1/4 6 3/8 6 1/4 3 5/8
4 6 3/4 7 7 1/2 8 8 1/8 9 1/8 4 1/8
5 7 5/8 8 3/8 9 3/8 9 5/8 9 7/8 10 7/8 5 1/8
6 8 5/8 9 3/4 10 3/8 11 1/4 11 12 3/8 6 1/8
8 10 7/8 12 12 1/2 14 13 3/4 15 1/8 8
10 13 1/4 14 1/8 15 5/8 17 17 18 5/8 10 1/8
12 16 16 1/2 17 3/4 19 1/2 20 3/8 21 1/2 12
14 17 5/8 19 19 1/4 20 3/8 22 5/8 13 1/4
16 15 1/4 21 1/8 22 22 3/8 25 1/8 15 1/4
18 21 1/2 23 3/8 24 25 27 5/8 17 1/4
20 23 3/4 25 5/8 26 3/4 27 3/8 29 5/8 19 1/4
22
24 28 1/8 30 3/8 31 32 7/8 35 3/8 23 1/4

 

RTJ Bleed Ring Dimensions, RTJ Bleed Ring Weight

RTJ Bleed Ring Dimensions

Line Size DIMENSIONAL DATA
300# / 400# / 600# 900# 1500# 2500#
A B RING A B RING A B RING A B RING
1″ 2.750 1.320 R-16 2.812 1.320 R-16 2.812 1.320 R-16 3.250 1.320 R-18
1-1/2″ 3.562 1.900 R-20 3.625 1.900 R-20 3.625 1.900 R-20 4.500 1.900 R-23
2″ 4.250 2.375 R-23 4.875 2.375 R-24 4.875 2.375 R-24 5.250 2.375 R-26
2-1/2″ 5.000 2.875 R-26 5.375 2.875 R-27 5.375 2.875 R-27 5.875 2.875 R-28
3″ 5.750 3.500 R-31 6.125 3.500 R-31 6.625 3.500 R-35 6.625 3.500 R-32
4″ 6.875 4.500 R-37 7.125 4.500 R-37 7.625 4.500 R-39 8.000 4.500 R-38
6″ 9.500 6.625 R-45 9.500 6.625 R-45 9.750 6.625 R-46 11.000 6.625 R-47
8″ 11.875 8.625 R-49 12.125 8.625 R-49 12.500 8.625 R-50 13.375 8.625 R-51
10″ 14.000 10.750 R-53 14.250 10.750 R-53 14.625 10.750 R-54 16.750 10.750 R-55
12″ 16.250 12.750 R-57 16.500 12.750 R-57 17.250 12.750 R-58 19.500 12.750 R-60

 

Raised Face Bleed Ring Dimensions

Rasied Face Bleed Ring Dimensions

Rasied Face Bleed Ring Dimensions

 

Types of Bleed Ring

ANSI B16.5 Bleed Ring ANSI B16.5 Class 150 Bleed Ring
2 Bleed Rings Pipe Bleed Ring
4 Bleed Ring Bleed Ring Dimensions
ASME B16.20 Drip Rings 2 150# Bleed ring
Raised Face Bleed Ring Suppliers Vent Rings
Bleed Ring Flat Face Bleed Rings in ASME B31.3
ANSI B16.20 class 150 Bleed Ring Stockholder Raised Face Bleed Rings
Bleed Ring Class 150 High Quality Bleed Ring
ASME B31.3 Bleed Rings Steel Bleed Ring

 

Bleed Ring Cost

Bleed Ring Price: $22.45 / each
RTJ Bleed Ring Price: $25.14 / each
Raised Face Bleed Ring Price: $20.35 / each

ANSI B16.5 Bleed Rings Application

ASME B16.20 Bleed Rings are known to deliver exceptional performance and are generally developed for meeting the demands. These Bleed Rings are used in various industries applications like :

  •  Raised Face Bleed Rings uses in Structural Pipe
  •  4 Bleed Ring uses in Plumbing
  •  2 150# Bleed Rings uses in Heating
  •  Stainless Steel Bleed Ring uses in Oil and Gas Pipeline
  •  RTJ Bleed Rings uses in Chemical Industry
  •  Steel Bleed Ring uses in Food Processing Industry
  •  Vent Rings uses in Fabrication Industry
  •  Drip Ring uses in Water Supply Systems
  •  ANSI B16.5 Bleed Ring uses in Power Plant
  •   Bleed Rings uses in Paper & Pulp Industry
  •  Drip Rings uses in General Purpose Applications

 

ASME/ANSI B16.5 Bleed Ring Supplying to Following Regions & Countries:

AFRICA
Nigeria
Algeria
Angola
Tanzania
Libya
Egypt
Sudan
Equatorial Guinea
The Republic Of Congo
Gabon
NORTH AMERICA
Usa
Canada
Mexico
Costa Rica
Trinidad And Tobago
Jamaica
Denmark
MIDDLE EAST ASIA
Saudi Arabia
Iran
Iraq
Uae
Qatar
Bahrain
Oman
Kuwait
Turkey
Jordan
SOUTH AMERICA
Argentina
Bolivia
Brazil
Chile
Venezuela
Colombia
Ecuador
Guyana
Paraguay
Uruguay
EUROPE
Norway
Germany
France
Italy
Uk
Spain
Netherland
Belgium
Greece
Czech Republic
Portugal
Hungary
SOUTH AFRICA
ASIA
India
Singapore
Malaysia
Indonesia
Thailand
Vietnam
South Korea
Japan
Sri Lanka
Maldives
Bangladesh
Mayanmar
Taiwan
Cambodia